| Ingredient: | PLA 170mg + Ha 30mg |
|---|---|
| Treatment Cycle: | Single Treatment Can Be Performed Again After 3 Mo |
| Shelf Life: | 2years |
| Function: | Remove Wrinkle, Skin Tightening |
| Transport Package: | Carton with Foam |
| Specification: | 200mg/vial |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier Aesthefill is a facial treatment that provides deep tissue regeneration to reduce the signs of facial aging.
Aesthefill is made of PLA (polylactic acid), which is a biocompatible and biodegradable substance, approved by the US FDA and also used in lifting thread materials. It naturally stimulates skin cells to produce their own collagen.
AestheFill is based on polylactic acid, which has been successfully used in medicine for over 20 years, and is a completely self-absorbing material that is used to make surgical sutures. After examining the natural properties of the polymer, scientists determined its chemical and physical stability, the lack of protein components that have become a common cause of allergic reactions.
The preparation uses spherical particles of polylactic acid, called thermoplastic and biodegradable polylactide, which is obtained from corn or potato starch by polymerization. Structurally, polylactic acid is a ball, which in turn contains L-lactic and D-lactic acid with the same chemical and physical parameters.
Gel biodegradation occurs independently: as a result of hydrolysis, polylactide gradually breaks down into lactic acid and glycogen, and then is naturally excreted from the body.
As soon as the product enters the skin, it begins to actively fill the voids that arise as a result of skin aging and the loss of its own structural proteins. At the target site, polylactide molecules start the immediate process of tissue renewal and collagen formation, thanks to which the volume is fully replenished and even deep wrinkles are smoothed out. This is due to the special properties of AestheFill molecules, which, thanks to their porous structure, ensure the most effective collagenogenesis. Fibroblasts (skin cells) begin to work both outside and inside the microspheres.
In addition, polylactic acid actively stimulates the production of hyaluronic acid by mature skin cells. The uniqueness of the filler lies in the fact that after the breakdown and complete removal of its main active substance from the body (this process lasts on average from 3 to 4 months), the place where the gel is placed is not left with a void, but with new collagen and elastin. Therefore, the effect will last a long time - until the breakdown of own collagen and elastin begins under the influence of age factors. At this point, the procedure can be repeated.
In the AestheFill hydrogel, polylactide has a porous structure with finely dispersed particles of the same size, which ensures that the gel is evenly distributed under the skin. Many balls appear to "roll on the floor" and fill all voids without needing to be corrected.
When is AestheFill recommended?
Among the main indications for the use of AestheFill hydrogel are:
The product is injected directly into the sites of the largest lesions or over the entire face if the skin looks flabby, dehydrated and atonic. The treatment ends with a light massage that evenly fills the inner layers of the dermis with the gel.
When is the result visible?
The result becomes noticeable already after the first procedure. Wrinkles are smoothed out, creating a visible volume. It is true that a week after the AestheFill injections, a slight loss of volume is still possible (the drug solvent - water - will be removed from the manipulation area), but this will not affect the quality of the result.
Advantages of AestheFill
Polylactic acid and AestheFill based on it are safe for the body. As mentioned above, polylactic acid is naturally excreted from the body. This means that the patient should not be afraid of health problems related to the presence of non-degradable polymers in the body.
The product does not migrate to adjacent tissues. All polylactic acid molecules introduced into the dermis remain in the desired layer and tightly maintain the volume in the injection zone.
An additional advantage is also the correct geometric shape of polylactic acid particles, which prevents clogging of small vessels during administration.
AestheFill is also supported by the fact that during the procedure, the doctor can suspend the desired concentration and perform work on different levels of the dermis (deep and superficial).
After the treatment, there is no need to perform any complicated care activities. It is important not to touch the injection sites, to avoid infecting infections, which may cause complications. It is necessary to refrain from using cosmetics, do not go to the sauna, solarium or swimming pool for a while, and in addition, if possible, they will not appear in the cold or wind, if the injections are made in the cold season, or in the heat, if in summer.
If you play sports, the intensity of physical activity should be reduced after the procedure. When you recover, give up alcohol or tobacco.
Indications for the procedure:
Q:Is it safe?
A:There are very few risks, because it naturally occurs in body. None of it remains in skin and the skin does not suffer any damage.
Q:Is there any side effects? A:The most common side effects are tenderness, swelling, firmness, lumps/bumps, bruising, pain,
redness, discoloration, and itching. Most side effects are mild or moderate and last 14 days or less.
Q:Does the treatment hurt?
A:The treatment is relatively painless.
Q: Can I put my own logo (OEM)?
A Yes!
Q: How can you guarantee the production quality?
A: We have strictly quality control system in our production process which is CE certified.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}